From industrial process measurement to clinical bedside monitoring
Solution highlights and case studies across chemicals, energy, metallurgy and medical. Filter by industry, or contact us to discuss a specific application.
Solutions & case studies
Each card is tagged by industry and product category — click to view the full case.
Bedside Lung-Ventilation Monitoring in the ICU
Electrical Impedance Tomography (EIT) shows regional gas distribution and respiratory rate in the lungs in real time — non-invasive, able to run continuously at the bedside, and supporting mechanical-ventilation strategy.
Flow Monitoring in Liquid-Metal Cooling Loops
Non-contact measurement of the velocity and flow rate of liquid lead / sodium / lead-bismuth alloy based on the eddy-current principle; suitable for 200-500 ℃ high-temperature corrosive environments.
Resistance Tomography (ERT) for Liquid-Solid Two-Phase Flow Detection
Using the conductivity contrast between the solid and liquid phases, image the phase distribution and concentration changes of liquid-solid two-phase flow in pipes / vessels in real time — demonstrating online detection for slurry transport, crystallisation and particle suspension.
Capacitance Tomography (ECT) for Imaging Inside Sealed Packaging
Without opening the box, image the distribution of items inside a sealed package from permittivity contrast — demonstrating the potential of ECT for missing-item detection, foreign-object identification and more on packaging lines.
EIT Reconstruction-Algorithm Validation & Comparison
An experimental platform for university EIT algorithm research, impedance-model building and clinical data acquisition, supporting raw-data export and multi-algorithm comparison.
Process Monitoring of Gas-Solid Fluidised Beds
Observe bubble motion, particle spatial distribution and bed-structure changes inside a fluidised bed in real time, supporting process optimisation of combustion / gasification reactors.
Material-Distribution Monitoring in Food Mixing Tanks
Observe mixing uniformity and emulsification dynamics inside a stirred tank in real time; provide data for quality control in food / consumer-goods production.
Internal-Defect Detection in Hot-Rolled Plate & Steel
Use the metal-flaw-detection mode of electromagnetic tomography to detect internal defects and foreign-object positions in hot-rolled steel plate, welds and thick-walled metal parts.
Slurry Density & Concentration Tracking
Monitor solid-liquid concentration changes and density distribution inside a slurry pipeline in real time; avoid blockages and improve the stability of mineral processing and metallurgy.
Multiphase Flow & Heat/Mass-Transfer Research Platform
A research platform for multiphase flow, heat/mass transfer and process intensification, built for university and corporate R&D departments; supports parameter customisation and algorithm-level access.
Flow-Regime Identification in Oil-Water Multiphase Flow
Identify flow regimes inside oil-gas-water pipelines and measure water cut and interface position online, providing a basis for long-distance pipeline processing and metering.
Visualising the Mixing Process Inside a Chemical Reactor
Assess mixing, residence-time distribution and mass-transfer efficiency inside chemical / biological reactors; observe catalyst distribution and the uniformity of multiphase reactions.
Engineering services
Beyond instrument supply, our engineering team is involved end-to-end — from early feasibility study, through on-site commissioning, to long-term joint development.
Feasibility study
We evaluate the technical route, sensor selection, excitation parameters and reconstruction strategy for your specific measurement need — and deliver a feasibility report you can act on before committing to hardware.
- Requirements analysis and measurement-target decomposition
- Technical-route and parameter-fit evaluation
- Feasibility report with recommended solution
On-site trial
Field engineers on the customer site to install sensors, commission the acquisition system, validate raw data and compare imaging results against existing process indicators.
- Site survey and equipment layout
- Acquisition & imaging system commissioning
- Measurement vs. process-data verification
Installation & training
System installation, commissioning and operator training after delivery — so your team can run the imaging system independently, perform routine maintenance and handle common faults.
- Equipment installation and system integration
- Operator & maintenance training
- Common-issue and troubleshooting guide
Joint development
Long-term collaboration with research groups and corporate R&D teams: custom sensor hardware, algorithm co-development, joint applications for research grants and industrialisation projects.
- Custom sensors and hardware platform
- Algorithm co-development and validation
- Joint research project applications
How we work together
Four clear stages from first conversation to long-term support — predictable at every step.
Discovery
Initial call / email to understand your application, measurement objectives and constraints.
Evaluation
Feasibility judgement and preliminary solution based on the site context and technical requirements.
Engagement
Once scope and commercial terms are agreed, the project starts — covering production / custom development, field trial, etc.
Delivery & support
Equipment delivery, training, long-term support; algorithm updates or new-feature co-development on request.
Don't see your application?
The cases above are only a sample. Electrical tomography has a broad application envelope — tell us your specific measurement need and we'll evaluate technical feasibility together.